UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
genuine image
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
Optimize your workspace with this sturdy 19 inch rackmount designed for Raspberry Pi boards.
UCTRONICS 1U Rack for Raspberry Pi, 19" Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
Numéro d'article: 38682790

UCTRONICS 1U Rack for Raspberry Pi, 19" Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models

88% des répondants recommanderaient ceci à un ami

Numéro d'article: 38682790

MUR 2629

Détails du prix

Hors frais de livraison et de douane ( Les frais de livraison et de douane seront calculés lors du paiement )

*Tous les articles seront importés depuis États-Unis

En stock
États-Unis Importé depuis la boutique USA

QTY:

Commandez maintenant et recevez votre commande aux alentours du Jeudi, Septembre 24
Transaction sécuriséeTransaction sécurisée

Ubuy s'engage à protéger votre sécurité et votre confidentialité. Notre système avancé de sécurité des paiements garantit la confidentialité en chiffrant vos informations lors de la transmission grâce aux protocoles AES (Advanced Encryption Standards) et SSL (Secure Socket Layer). Vos coordonnées de paiement sont 100 % sécurisées car nous ne partageons pas vos informations de paiement avec des vendeurs tiers.

Nos meilleurs partenaires logistiques
  • fedex
  • dhl
Optimize your workspace with this sturdy 19 inch rackmount designed for Raspberry Pi boards.
Garantie U-Care :
Aucun
Sélectionnez un forfait
fast shipping

Livraison
rapide

free return

Retour
gratuit*

Emballage sécurisé

Emballage sécurisé

Produits 100 % originaux

Produits 100 % originaux

pci-dss

Conformité PCI DSS

iso certified

Certifié ISO 27001

paypal payment
visa payment
mastercard payment
Note: Step Down Voltage Transformer required for using electronics products of États-Unis store (110-120). Recommended power converters Acheter maintenant.

Ce qui se démarque

Space Optimization
Designed to fit 1-4 Raspberry Pi units in a 19" rack, maximizing space efficiency while maintaining organization and accessibility.
Universal Compatibility
Compatible with all Raspberry Pi models including 5, 4B, 3B, and B+, ensuring versatility for various project needs.
Durable Build
Constructed with high-quality materials for durability and stability, providing a reliable mount for your Raspberry Pi devices in professional settings.

Détails du produit

Shop UCTRONICS 1U Rack for Raspberry Pi, 19 Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models online at a best price in Mauritania. B08F9X528J
BrandUCTRONICS
Number of Items1
ManufacturerUCTRONICS
Number of Packs1
Model NumberU6123
Mfr Part NumberU6123
Item Dimensions D x W x H1.75"D x 19"W x 1.75"H (4.4 x 48.3 x 4.4 cm)
Size1U Rackmount
Compatible DevicesServers
Mounting TypeRack Mount
Color1U Rackmount
Enclosure MaterialMetal
Product Dimensions (L x W x H)1.75"D x 19"W x 1.75"H (4.4 x 48.3 x 4.4 cm)
MaterialMetal
Package Weight5.20 Pound

À qui est-ce destiné ?

Suitable For
  • Developers

    Ideal for developers wanting a neat solution to organize multiple Raspberry Pi units for testing and deploying applications.

  • Raspberry Pi Enthusiasts

    Great for hobbyists looking to create a compact and efficient setup using multiple Raspberry Pi models in one rack.

  • Small Servers

    Suitable for individuals or businesses setting up a low-cost server environment utilizing Raspberry Pi devices in a rack.

Not Suitable For
  • Limited Space Users

    Not suitable for users with limited space, as it requires a 19-inch rack for installation.

DESCRIPTION DU PRODUIT

About This Item

Introducing the UCTRONICS 1U Rack for Raspberry Pi - your ultimate solution for organizing and optimizing your Raspberry Pi setup. Designed specifically for Raspberry Pi enthusiasts, this 19" rackmount is built to accommodate 1-4 units of all Raspberry Pi BB Models, allowing you to conveniently store and access your devices in a compact and secure manner. With our 1U Rackmount, you can easily create a centralized hub for your Raspberry Pi projects, making it perfect for home automation, media servers, network applications, and more.

The sleek and sturdy design of the rack provides a professional and organized look, ideal for both personal and commercial use. Made from high-quality materials, it ensures durability and long-lasting performance, giving you peace of mind knowing your Raspberry Pi units are safely secured. Thanks to the UCTRONICS 1U Rack, you can now save valuable desk space and keep your Raspberry Pi devices neatly organized. No more cluttered cables or tangled wires - simply mount your Raspberry Pi units in this rack and enjoy a clean and efficient workspace. Expand your Raspberry Pi capabilities and take your projects to the next level with the UCTRONICS 1U Rack.

Click "Add to Cart" now and experience the convenience and professionalism this rack brings to your Raspberry Pi setup.

Vous avez une question ? Chattez avec nous

Questions et réponses des clients

  • question: What Raspberry Pi models are compatible with this rackmount?

    répondre: The rackmount is designed for Raspberry Pi 4 B, 3 B/B+ and other B/B+ boards.
  • question: Is installation user-friendly?

    répondre: Yes, it includes screws for easy installation of Raspberry Pi boards.
  • question: What materials are used in the rackmount's construction?

    répondre: It is made of 1.2mm carbon steel with a matte black powder coat finish for durability.
  • question: Does the top overhang prevent mounting a cooler like the geeekpi ice tower?

    répondre: There is no top overhang, a tiny bottom just enough to screw the front or back 2 screws into raspberry motherboard. Yeah you should have no problem.
  • question: Will a raspberry pi 4 with the official POE hat installed fit on this mount?

    répondre: Yes it will. I have both a 3 & 4 mounted in this mount.
  • question: Will the recently released (may 2021) official poe+ hat by raspberrypi foundation fit the rack mount ?

    répondre: I haven't seen this new PoE HAT but I don't think it will interfere at all. The HAT mounts on the Pi with same form factor and it is the Pi that attaches to this rack mount support. Plenty of clearance there.
  • question: The included screws do not tighten all the way down to the Pi board. They become impossible to torque after a few turns. Is this by design?

    répondre: Hello, generally, the problem that screws do not tighten is not common. We suspect that the studs are blocked by painting. If it's convenient, could you send us a picture? This will help us diagnose the problem for you.

UCTRONICS Single Board Computers U6123 Editorial Review

  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania
  • ubuy Mauritania

The UCTRONICS 1U Rack for Raspberry Pi, 19" Rackmount boasts compatibility with all Raspberry Pi BB models, including the official POE hat, and provides a stable physical connection for multiple Pis. The questions answered by the manufacturer revealed that there is no top overhang to prevent mounting coolers and no power switch keystone jack currently offered. One customer praised the product for its durability over two years of use, making it a recommended purchase. Other reviews noted that there are very narrow tolerances on the holes cut out of the rack, keystones do not fit flush, and there is no rear support for power cables. One review also mentioned that the threads on this product do not work with the official POE+ hat. The key takeaway from the reviews is that if you need to organize and structure multiple Pis, this rackmount is a perfect solution, but with some minor drawbacks.

Avis et évaluations clients

182 évaluations des clients
  • 5 étoile
    71%
  • 4 étoile
    18%
  • 3 étoile
    6%
  • 2 étoile
    3%
  • 1 étoile
    2%

Donnez votre avis sur ce produit

Partagez votre avis avec d'autres clients

Avantages

  • Compatible with all Raspberry Pi BB models, including official POE hat
  • Provides a stable physical connection for multiple Pis
  • Sturdy and made of good quality material
  • Perfect for organizing and structuring multiple Pis in a network rack or cabinet

Les inconvénients

  • Very narrow tolerances on the holes cut out of the rack

CONFIANCE EN LA PLATEFORME & PROTECTION DE L'ACHETEUR

trustpilot logo
4.2/5 9477 commentaires
Lire les avis
JK
Jasmin
Acheteur vérifié

“Great products and very good service: very easy and very fast international delivery.”

9 September 2026 · via Trustpilot
AG
Anke
Acheteur vérifié

“Wonderful online shopping experience, smooth transaction from the start. Payment method works conveniently and delivery is unexpectedly fast and reliable. You go the extra mile for service. What makes this even more amazing, you deliver to Namibia. I will remain a happy Ubuy customer and will increase my purchases for sure! Thank you!”

10 September 2026 · via Trustpilot
H
Hazel
Acheteur vérifié

“Very easy to find the products what you need, and so fast delivery, that’s why I highly recommended to others costumers to used ubuy.”

10 September 2026 · via Trustpilot
O
Opaleye
Acheteur vérifié

“I received exactly what I ordered I was skeptical about your site because that was my first time to order. But the order came timely and neatly packaged. I was not disappointed. Thank you.”

11 September 2026 · via Trustpilot
AC
Adele
Acheteur vérifié

“Easy to find and order what you want on the website. Delivery is quick to the UK”

8 September 2026 · via Trustpilot
Paiement sécurisé Global Delivery Retours faciles Genuine Products

Historique des prix du produit

Informations importantes

  • Limitations : Pour les produits expédiés à l'international, veuillez noter que toute garantie du fabricant peut ne pas être valide ; les options de service du fabricant peuvent ne pas être disponibles ; les manuels, instructions et avertissements de sécurité des produits peuvent ne pas être dans les langues du pays de destination ; les produits (et les matériaux qui les accompagnent) peuvent ne pas être conçus conformément aux normes, spécifications et exigences d'étiquetage du pays de destination ; et les produits peuvent ne pas être conformes à la tension et aux autres normes électriques du pays de destination (nécessitant l'utilisation d'un adaptateur ou d'un convertisseur le cas échéant). Il incombe au destinataire de s'assurer que le produit peut être importé légalement dans le pays de destination. En cas de commande auprès d'Ubuy ou de ses filiales, le destinataire est l'importateur officiel et doit se conformer à toutes les lois et réglementations du pays de destination.
  • Tous les produits listés sur Ubuy ne sont pas à vendre, Ubuy étant un moteur de recherche mondial. Les produits sont soumis aux réglementations en matière d'exportation et de commerce.

MUR 2629

Commandez maintenant et recevez votre commande aux alentours du Jeudi, Septembre 24

QTY:

Transaction sécuriséeTransaction sécurisée

Conforme PCI DSS et certifié ISO 27001:2022, avec des paiements chiffrés et une protection complète de l'acheteur pour chaque commande.

Nos meilleurs partenaires logistiques
  • fedex
  • dhl
Livraison transfrontalière la plus rapide

Caractéristiques et avantages

  • Holds up to 4 Raspberry Pi B/B+ boards.
  • Standard 1U size, compatible with 19” server racks.
  • Easy installation with included screws for secure mounting.
  • Durable 1.2mm carbon steel construction with a matte black finish.
  • Optimizes workspace for Raspberry Pi clusters and video walls.
  • Versatile slots for HDMI, LAN, USB and more.

Assurance Ubuy

Profitez d'une expérience d'achat sereine avec des produits 100 % originaux, une sécurité de paiement conforme PCI DSS, une protection des données certifiée ISO 27001, la livraison transfrontalière la plus rapide, les retours gratuits* et un emballage sécurisé pour chaque commande.